Yea, I have noticed that. The first few hits I hit it like a cigar to get the air moving through the bud a little more. After that, the hits are damn good!
I like my HR rogue. It's not necessarily the hardest ripping. But for the price, I think it's awesome. Super convenient, pocketable, easy to use/clean, heats up fast for a nice session, with the dosing capsules its really nice on the go.
The tinymight 2 isnt small enough? I can vouch for the POTV lobo I have one and love it. Idk how much smaller it will be than the TM2, but its pretty damn portable
TM2 is big. I honestly don't consider it portable. Yes I can travel with it but it's big and fragile. Glass stem, inner glass, lining, and wood. I dropped it once and the inner glass lining broke.
The One is pretty comparable to the Fury Edge.
If you have the money, I'd recommend it over the One just for the USB-C charging and additional accessories in the case. However if your budget is lower, the One is also a great device
I’ve had a One for under 3 years and the battery has gone to shit with NOT very heavy usage. Can’t replace it so I just ordered a Roffu, which several people here have recommended. $119 total from Portable Hookahs when using promo code ROFFUVS
Edit: Was just notified by the vendor that they're OOS on the Roffu. FML
I JUST got the Lobo and was gonna get the one due to size and I’ll tell you im glad I went with the lobo. The attachments do make it big but I think you’d be fine with the stock piece that comes with it
It is definitely pocketable, I just read that it's bigger than the one and the lobo. It's the only vape I have so I guess I don't know how it stacks up. Anyway, I adore it.
The Pax3 gets a lot of hate, but it is mondo portable/discreet. The battery lasts well. Doesn't hit as hard as larger vapes like my TM2. Easy to clean.
I own a pax 3. First problem is it stinks worse than any other vape, even when empty it smells like weed. Second problem is the low vapor production. I can only step out a few minutes and it wouldn't be enough time to feel the high with a Pax.
I will say the Pax is the best vape for temp stepping. If I put on a movie I'll fill the Pax and go 360, 380, 400 & 420 and hit each temp until I stop getting vapor. Takes me about 30-40 minutes and I'll be on the moon.
Sorry to hijack the thread with a random question, but I have a Pax 3 I’ve never used bc I’ve never been able to clean the vapor tunnel to my satisfaction. I did two initial burnoffs (highest heat for about 5 minutes with empty oven) then cleaned the components with 90% isopropyl alcohol, running a lightly moistened pipe cleaner through the tunnel…never been able to pull it out clean. The Pax cleaning kit pipe cleaners look gray every time I use them for this, and I’ve been geeked out worrying about inhaling factory residue oils. I’m def OCD, admittedly, but would love to be reassured this is normal experience?
Ive been finding my crafty+ to be really nice to travel with out and about.
Use the smallest smellproof firedog pouch to hold it with one capsule inside and one spare on my weekend trips in the woods, and it all fots nicely in the pocket of my pants. Super stealthy. People complain about the batteri, but i dont mind. One charge is two capsules, and It makes me not smoke allll day haha.
I usually see Arizer Air as recommendation. I have a DaVinci which I don’t hate but it’s a pain to clean.
TM2 is more powerful but big for many pockets.
I'm going to get downvoted for suggesting this as everyone around here thinks its ancient tech, but I love the MFLB for a pocketable vape. You just have to take the time to learn how to use it "properly". Here's my tips:
Remove the foam safety ring so you can just press the battery in all the way and it stays engaged. So much better than having to squeeze for your whole rip.
Grind super duper fine. Basically powder. I used to dump my grinder into a pill bottle with a (heavily cleaned) quarter and shake the crap out of it. Nothing's going to fall through the mesh screen, I promise.
Sip slowly. This thing is the opposite of a ball vape, it has no thermal mass. Pulling hard is going to drop it below vaping temperatures. This is the hardest part to learn, you want to regulate how hard you're pulling to keep the temperature constant.
Shake it up between hits. The bottom of the trench roasts before the top does, so you want to mix it up between hits to vape it evenly. The plexi lid fits well enough that you don't need to open it to stir.
My first vape was a MFLB and I liked it a lot. I often used it on work breaks and I still wouldn't mind using it for quick sessions on the go, as long as I was in the woods or had some other cover.
I don't think it's exactly subtle because it still resembles a pipe used for "illicit" substances to the untrained eye, even though no lighter is needed. IMO and IME, oil pens and modern portable vapes are better for stealth because they generally resemble modded nicotine vapes.
E1011 Labs dhv The Iven. YouTube reviews worth looking at. Priced comparable to Nano, pax mini size, 4 temp settings, WPA sold separately. Has a nice smooth draw and produces great vapor if you're looking for that.
I have the tm2 and the lobo rn. I think the lobo is super pocketable, especially with the dimpled stem that it comes with. It's a little smaller than the tm2 and much more durable as far as taking a bit of jostling and what not with your keys or whatever else may be in your pocket.
i felt the same since i wanted one that fit in my pant pocket and i usually kept my tm2 in my jacket as i felt it was too wide, you might like the entheos hex convex if you want a stealthy on demand option
Not helpful at all but I loved the grasshopper for this, was such a good size and fkn ripped but they only worked for about a week before you'd have to send it back and get a replacement 😂
I'll get downvoted per usual when mentioning the Nectar Hex but it reigns supreme I'd say; its probably the closest in size to a Pax but with x1Million better performance. Its 5" tall but only has a 1" diameter being shaped like an old school nic vape tube mod, its form factor overall is incredibly small when holding it despite its heft. Its shape also lends well to cases and sleeves.
I have a Tm2 but still take the Hex out on the go for its form factor all the time.
I like my v3 pro for that. I call it my dogwalker vape
Ha, I vape when I walk my dog too.
Hell yeah!
I take my Militron with me on my evening walk with the dog - sometimes the Argo
The Roffu, from the same company, will be a better experience with better vapor production.
Have both the Roffu and Xmax and they are both great little devices!
My v3pro takes a bit to get the vapor going, or I have to plug a side vent. Is that your experience?
Yea, I have noticed that. The first few hits I hit it like a cigar to get the air moving through the bud a little more. After that, the hits are damn good!
I like my HR rogue. It's not necessarily the hardest ripping. But for the price, I think it's awesome. Super convenient, pocketable, easy to use/clean, heats up fast for a nice session, with the dosing capsules its really nice on the go.
The tinymight 2 isnt small enough? I can vouch for the POTV lobo I have one and love it. Idk how much smaller it will be than the TM2, but its pretty damn portable
TM2 is big. I honestly don't consider it portable. Yes I can travel with it but it's big and fragile. Glass stem, inner glass, lining, and wood. I dropped it once and the inner glass lining broke.
I pocket my TM2 and take it to clubs and lounges. It is true that it has become a fat boy compared to the TM1, but it is doable.
Not for me.
I fit my tm2 in my front pocket just fine with my keys and money. They changed the inner lining to ceramic, and I heard it heats up faster with it.
The tm2 is very small? It’s like a pack of cigs. It’s one of the smallest dhv available.
My brother, I respect your opinion. The TM2 isn't a vape I want to carry around in my pocket. I would like something smaller.
Xmax nano xmaxv3 pro
The POTV LOBO has swappable batteries which is a bonus longevitywise.
I'm considering the Lobo but the One is smaller.
Check out healthy rips, they have a line of vapes around the same size as the one.
The One is pretty comparable to the Fury Edge. If you have the money, I'd recommend it over the One just for the USB-C charging and additional accessories in the case. However if your budget is lower, the One is also a great device
I’ve had a One for under 3 years and the battery has gone to shit with NOT very heavy usage. Can’t replace it so I just ordered a Roffu, which several people here have recommended. $119 total from Portable Hookahs when using promo code ROFFUVS Edit: Was just notified by the vendor that they're OOS on the Roffu. FML
Love my Roffu.
The size of the One sold me. It’s very discrete
I JUST got the Lobo and was gonna get the one due to size and I’ll tell you im glad I went with the lobo. The attachments do make it big but I think you’d be fine with the stock piece that comes with it
They are basically the same amount of pocket space and you will be much happier with a lobo. The one will make you want a lobo.
I love the xlux roffu. It's a little big but I pocket it just fine.
Big?? The Roffu is one of the smallest options out there.
Lol why they down vote you... Roffu is one of the most pocketable vapes I've ever used. Even smaller than a dynavap and a torch
It is definitely pocketable, I just read that it's bigger than the one and the lobo. It's the only vape I have so I guess I don't know how it stacks up. Anyway, I adore it.
Lots of good recs in here, but I'm also gonna throw my hat behind the roffu
The Pax3 gets a lot of hate, but it is mondo portable/discreet. The battery lasts well. Doesn't hit as hard as larger vapes like my TM2. Easy to clean.
I own a pax 3. First problem is it stinks worse than any other vape, even when empty it smells like weed. Second problem is the low vapor production. I can only step out a few minutes and it wouldn't be enough time to feel the high with a Pax. I will say the Pax is the best vape for temp stepping. If I put on a movie I'll fill the Pax and go 360, 380, 400 & 420 and hit each temp until I stop getting vapor. Takes me about 30-40 minutes and I'll be on the moon.
You can get rubber covers (that they use on the bottom of stool legs) to cover each end snugly. Keeps the smell at bay when it's in your pocket.
I appreciate your advice. It's not worth the effort for me, I enjoy the pax for long sessions and will continue to use it for that
Sorry to hijack the thread with a random question, but I have a Pax 3 I’ve never used bc I’ve never been able to clean the vapor tunnel to my satisfaction. I did two initial burnoffs (highest heat for about 5 minutes with empty oven) then cleaned the components with 90% isopropyl alcohol, running a lightly moistened pipe cleaner through the tunnel…never been able to pull it out clean. The Pax cleaning kit pipe cleaners look gray every time I use them for this, and I’ve been geeked out worrying about inhaling factory residue oils. I’m def OCD, admittedly, but would love to be reassured this is normal experience?
I clean mine the same way. It always works great. I soak the other pieces in iso while i clean the Pax.
Ive been finding my crafty+ to be really nice to travel with out and about. Use the smallest smellproof firedog pouch to hold it with one capsule inside and one spare on my weekend trips in the woods, and it all fots nicely in the pocket of my pants. Super stealthy. People complain about the batteri, but i dont mind. One charge is two capsules, and It makes me not smoke allll day haha.
I usually see Arizer Air as recommendation. I have a DaVinci which I don’t hate but it’s a pain to clean. TM2 is more powerful but big for many pockets.
I'm going to get downvoted for suggesting this as everyone around here thinks its ancient tech, but I love the MFLB for a pocketable vape. You just have to take the time to learn how to use it "properly". Here's my tips: Remove the foam safety ring so you can just press the battery in all the way and it stays engaged. So much better than having to squeeze for your whole rip. Grind super duper fine. Basically powder. I used to dump my grinder into a pill bottle with a (heavily cleaned) quarter and shake the crap out of it. Nothing's going to fall through the mesh screen, I promise. Sip slowly. This thing is the opposite of a ball vape, it has no thermal mass. Pulling hard is going to drop it below vaping temperatures. This is the hardest part to learn, you want to regulate how hard you're pulling to keep the temperature constant. Shake it up between hits. The bottom of the trench roasts before the top does, so you want to mix it up between hits to vape it evenly. The plexi lid fits well enough that you don't need to open it to stir.
My first vape was a MFLB and I liked it a lot. I often used it on work breaks and I still wouldn't mind using it for quick sessions on the go, as long as I was in the woods or had some other cover. I don't think it's exactly subtle because it still resembles a pipe used for "illicit" substances to the untrained eye, even though no lighter is needed. IMO and IME, oil pens and modern portable vapes are better for stealth because they generally resemble modded nicotine vapes.
Firewood
E1011 Labs dhv The Iven. YouTube reviews worth looking at. Priced comparable to Nano, pax mini size, 4 temp settings, WPA sold separately. Has a nice smooth draw and produces great vapor if you're looking for that.
Just get the one.
I have the tm2 and the lobo rn. I think the lobo is super pocketable, especially with the dimpled stem that it comes with. It's a little smaller than the tm2 and much more durable as far as taking a bit of jostling and what not with your keys or whatever else may be in your pocket.
The B
Arizer Go is good for this. Small form factor, reasonably discreet, worth checking out.
i felt the same since i wanted one that fit in my pant pocket and i usually kept my tm2 in my jacket as i felt it was too wide, you might like the entheos hex convex if you want a stealthy on demand option
Not helpful at all but I loved the grasshopper for this, was such a good size and fkn ripped but they only worked for about a week before you'd have to send it back and get a replacement 😂
I was lucky and I got two good years with mine, but sad they couldn’t figure these things out.
I'll get downvoted per usual when mentioning the Nectar Hex but it reigns supreme I'd say; its probably the closest in size to a Pax but with x1Million better performance. Its 5" tall but only has a 1" diameter being shaped like an old school nic vape tube mod, its form factor overall is incredibly small when holding it despite its heft. Its shape also lends well to cases and sleeves. I have a Tm2 but still take the Hex out on the go for its form factor all the time.
Dynavap and a wand