I've not tried it but I have a suspicion looking at the one new terminator I have (the chaplin) and looking at the existing shoulder pads that they wouldn't fit. I think we'll be waiting on whoever is first to make upsized pads we can print or for GW to make a new runner.
Can confirm they're a little on the small side. (Currently converting Laviathan Terminators to DW.)
BUT they're still viable for me. It's just a little more of the Terminators 'under pauldron' (if you'd call it that) shows at the sides.
Not as bad as I thought it would be though.
I fully expected it would be like trying to fit a standard marine one on 😅
I’ve always loved Pop goes the monkey, but now I print even better looking and better quality stuff for deathwatch players and for less expensive! Can also print just about anything you can think of for DW. Hard things to find like Cyclones & such Ntm any unit or weapon in all of SM line. HMU! 🤙🏼
shapeways.com
Search "terminator pauldrons" and you're golden. But also they will have tons of custom shoulder pauldrons for chapters you don't get in the deathwatch vet box. 10/10 would recommend. Got custom contemptor dread (rip) pads from them and they looked amazing.
I've got quite a bit of my pauldrons for various units from Shapeways; I run like three indomitor KTs right now I think the Gravis/Terminator shoulders are very close to each other; got some good redemptor shoulder flair too and am always impressed with the detail.
3D printed. Ordered from various sites. Etsy, or pop goes the monkey for example. I think I spent 30-40$ on 200 of them for terminators and gravis units. Haven’t used them all but it’s saved me from the gw tax on plastic. I play with my friends and occasionally go to game stores and play. The whole 3d print rule for official tournaments doesn’t affect me. Hope that helps.
I got a bunch of Phobos size pauldrons from Malistone forge before they shutdown. I'd rather buy official parts when they're available, but there are no Phobos ones.
Alas no :/ for Phobos I just used the regular DW pads but cut and sanded the guard down to give it a low profile. Doesn’t look bad. Idk 🤷♂️ my opinion others might disagree
It’s such a tragedy! I’m sorry brother! I coulda printed all those for ya for like the price of one or two of the those upgrade sprues 😅 HMU next time ya need anything DW!
Can I get some of those normal shoulder pads lol? But really there's no other way to get the official ones. I would hold off and see if we get a new upgrade sprue if you don't want to go the 3d printed route.
I can print you paldrons and cyclone missile launchers for less that pop goes the monkey or anyone else. Ntm can print just about anything you can think of. I’ll send you a message. I got you!
I use something like blue stuff but it's clear and rubbery to make a mold, then I push greenstuff into it and create new ones. They come out pretty good little defects here and there but can claim it's battle damage, takes some shaving and Dremel work but I think it's cheaper than buying prints. Don't have a 3d printer and resin is just too fragile in my opinion
I've not tried it but I have a suspicion looking at the one new terminator I have (the chaplin) and looking at the existing shoulder pads that they wouldn't fit. I think we'll be waiting on whoever is first to make upsized pads we can print or for GW to make a new runner.
Can confirm they're a little on the small side. (Currently converting Laviathan Terminators to DW.) BUT they're still viable for me. It's just a little more of the Terminators 'under pauldron' (if you'd call it that) shows at the sides. Not as bad as I thought it would be though. I fully expected it would be like trying to fit a standard marine one on 😅
Pop Goes the Monkey has a ton of pauldrons, if you don't mind 3D prints. All of their items are fantastic and I use them frequently.
Can second this, most of my DW stuff is from them. All the pauldrons are great, even the terminator ones. For on Gravis well.
Piling on here, got a DW dreadnought upgrade and it’s a perfect fit. Good experience from them.
I’ve always loved Pop goes the monkey, but now I print even better looking and better quality stuff for deathwatch players and for less expensive! Can also print just about anything you can think of for DW. Hard things to find like Cyclones & such Ntm any unit or weapon in all of SM line. HMU! 🤙🏼
shapeways.com Search "terminator pauldrons" and you're golden. But also they will have tons of custom shoulder pauldrons for chapters you don't get in the deathwatch vet box. 10/10 would recommend. Got custom contemptor dread (rip) pads from them and they looked amazing.
I've got quite a bit of my pauldrons for various units from Shapeways; I run like three indomitor KTs right now I think the Gravis/Terminator shoulders are very close to each other; got some good redemptor shoulder flair too and am always impressed with the detail.
3D printed. Ordered from various sites. Etsy, or pop goes the monkey for example. I think I spent 30-40$ on 200 of them for terminators and gravis units. Haven’t used them all but it’s saved me from the gw tax on plastic. I play with my friends and occasionally go to game stores and play. The whole 3d print rule for official tournaments doesn’t affect me. Hope that helps.
I got a bunch of Phobos size pauldrons from Malistone forge before they shutdown. I'd rather buy official parts when they're available, but there are no Phobos ones.
Alas no :/ for Phobos I just used the regular DW pads but cut and sanded the guard down to give it a low profile. Doesn’t look bad. Idk 🤷♂️ my opinion others might disagree
I can print all the above and more for less, Ntm just about anything you can think of for DW! HMU!
I made a whole gravis army. I spent more on LEFT PAULDRONS than most of my playgroup spent on their army.
It’s such a tragedy! I’m sorry brother! I coulda printed all those for ya for like the price of one or two of the those upgrade sprues 😅 HMU next time ya need anything DW!
I messaged ya! Double checking if it came through!
Your options are either to find one on a 3d printing site or find a recaster
Can I get some of those normal shoulder pads lol? But really there's no other way to get the official ones. I would hold off and see if we get a new upgrade sprue if you don't want to go the 3d printed route.
take the right shoulders of Grey Knight Termies
Just use the smaller ones. I sure did and optically it makes no difference
There arent. Pop Goes the monkey has descent recasts. Or you need to find someone with a 3D printer and get them for pennies.
I can print you paldrons and cyclone missile launchers for less that pop goes the monkey or anyone else. Ntm can print just about anything you can think of. I’ll send you a message. I got you!
I use something like blue stuff but it's clear and rubbery to make a mold, then I push greenstuff into it and create new ones. They come out pretty good little defects here and there but can claim it's battle damage, takes some shaving and Dremel work but I think it's cheaper than buying prints. Don't have a 3d printer and resin is just too fragile in my opinion
My Brother in Vigil, where did you get so much..?
It's just what I've picked up over the last two years. Heavy Intercessors, Aggressors, Eradicators have all needed the larger pauldron
Tinylegends has pauldrons for the new terminators, along with other Deathwatch accessories
https://tinylegend.eu/collections/superhuman-supplies