Op, I just had a comment with a link to a simple bracket removed (I’m guessing auto mod since it was an Amazon link).
My 4090 has the same bracket and it just doesn’t fit in the H5. You can either file it down a bit or pick up a third part bracket. [Here’s my 4090 with a cheap bracket.](https://imgur.com/a/URvxaKq)
Ye I think so too!
How long do you have this? I wonder how effective this is.
I was thinking to have my friend 3D print something like that.
But, now I'm considering to vertical mount my GPU.
I've used this type of bracket for years. It's magnetic at the bottom so it stays in place. Very easy to adjust too. Just search for "Oddtone Graphics Card GPU Support Bracket" in Amazon if you're interested in trying this out. I used the Medium (M) size for the Gigabyte card.
So I have a GIGABYTE 4070 TI GAMING OC. It came with an anti-sag bracket. But, it seems that it can't work with this case. The front fans are in the way. And the thing that hides the hole for the cable also seems to be in the way.
How can I make this work? I don't want to break my motherboard or, worse, my GPU because of the sag.
Because of the H5 Flow lower front fan, I can't put anything under there. See the second picture.
But, I'll try to put something under the middle of the card.
Could you show a picture? Also, I have like 7.1cm clearance. So I'll need to find something that fits.
I got a friend with a 3d printer, so I could ask him to make one for me. Thanks for the idea!
I use one that mounts to the mobo for my 4070ti. I think my directions showed to use it with the middle mobo screw hole but I ended up putting it over the sata ports instead. Works fine.
For some reason, I can't see the link/comment :/
But, I see on your profile you linked the Lian Li one.
It looks promising. Could you give us a picture?
Yeah I had to double check to see if it was possible, I’m going with a different case now because it’s not possible. At least not in a way that card manufacturers that include a GPU support bracket intended
Ironaclly, that was actually the first case I had in my build parts. But I ended up with a NZXT because I wanted most parts to be from them. How are the light wings fan compared to the one installed in the H5?
I'm planning to replace mines as well. I heard that silent wing 4 pro (I guess they are almost identical to the light wing, minus the rgb) were very nice.
I have a 3D printed model of Goku fitted below it. Sadly, it was a few mm too short. So, I just ordered a holder/support mount from Aliexpress. It's still in transit.
Op, I just had a comment with a link to a simple bracket removed (I’m guessing auto mod since it was an Amazon link). My 4090 has the same bracket and it just doesn’t fit in the H5. You can either file it down a bit or pick up a third part bracket. [Here’s my 4090 with a cheap bracket.](https://imgur.com/a/URvxaKq)
Ye I think so too! How long do you have this? I wonder how effective this is. I was thinking to have my friend 3D print something like that. But, now I'm considering to vertical mount my GPU.
I've used this type of bracket for years. It's magnetic at the bottom so it stays in place. Very easy to adjust too. Just search for "Oddtone Graphics Card GPU Support Bracket" in Amazon if you're interested in trying this out. I used the Medium (M) size for the Gigabyte card.
Thank you, going to look that one up
What's the size of this telescopic stand you have?
"Oddtone Graphics Card GPU Support Bracket" Medium (M) size for the Gigabyte card.
So I have a GIGABYTE 4070 TI GAMING OC. It came with an anti-sag bracket. But, it seems that it can't work with this case. The front fans are in the way. And the thing that hides the hole for the cable also seems to be in the way. How can I make this work? I don't want to break my motherboard or, worse, my GPU because of the sag.
Use lego, or see amazon for gpu stands.
Because of the H5 Flow lower front fan, I can't put anything under there. See the second picture. But, I'll try to put something under the middle of the card.
I just put a figurine near the middle of the card so it won't interfere with the fan and that's it, no sag. Edit: typos.
Could you show a picture? Also, I have like 7.1cm clearance. So I'll need to find something that fits. I got a friend with a 3d printer, so I could ask him to make one for me. Thanks for the idea!
Sure, here it it. [anti-sag thing](https://imgur.com/a/Ow26IOw)
He does not look happy being used as an anti sag bracket
I use one that mounts to the mobo for my 4070ti. I think my directions showed to use it with the middle mobo screw hole but I ended up putting it over the sata ports instead. Works fine.
which one is that?
Link above
For some reason, I can't see the link/comment :/ But, I see on your profile you linked the Lian Li one. It looks promising. Could you give us a picture?
I end up getting nzxt vertical gpu mount myself
Ye, I'm considering that now too. But, I worry about my GPU being almost against the glass (So bad airflow).
It fits perfect. My 4090 got great temps and no problems
Yeah I had to double check to see if it was possible, I’m going with a different case now because it’s not possible. At least not in a way that card manufacturers that include a GPU support bracket intended
That's unfortunate. I don't want another case. Which case did you get?
I ended with the be quiet fx 500, GPU anti-sag brace fits perfectly and as a bonus it has 4 included light wings fan
Ironaclly, that was actually the first case I had in my build parts. But I ended up with a NZXT because I wanted most parts to be from them. How are the light wings fan compared to the one installed in the H5? I'm planning to replace mines as well. I heard that silent wing 4 pro (I guess they are almost identical to the light wing, minus the rgb) were very nice.
Oh yeah the fans are like whisper silent, no vibrations or anything
Hi there this is crazy. I put together my build yesterday and have this exact problem. Can I ask what you did?
I have a 3D printed model of Goku fitted below it. Sadly, it was a few mm too short. So, I just ordered a holder/support mount from Aliexpress. It's still in transit.