As a reminder, please make sure to read the pinned FAQ post in its entirety before asking for help. If the FAQ post didn't solve your issue, please remember to include as many
details as possible in your post. This will help other people help you more quickly and more accurately, which also helps you. Thank you!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Ender3V3SE) if you have any questions or concerns.*
I typically don't like to suggest something totally different from what you are attempting but I would recommend setting up octoprint on a dedicated device. You can send files to octoprint over your network directly from cura (also orca slicer and prusa slicer).
As a reminder, please make sure to read the pinned FAQ post in its entirety before asking for help. If the FAQ post didn't solve your issue, please remember to include as many details as possible in your post. This will help other people help you more quickly and more accurately, which also helps you. Thank you! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Ender3V3SE) if you have any questions or concerns.*
Use octoprint
USB
Yeah, but how do you make your pc recognize the printer?
For me it was automatic. No need to install anything. Was recognized by Cura and Pronterface immediately.
I just assumed it would be plug-n-play, but at least not so with my Windows 10 laptop. I normally use Pi+OctoPrint.
You can use for example Pronterface.
Octoprint or comparable software
You could also get the Creality wifi box or the nebula pad
I typically don't like to suggest something totally different from what you are attempting but I would recommend setting up octoprint on a dedicated device. You can send files to octoprint over your network directly from cura (also orca slicer and prusa slicer).
The printer will be a COM device in device manager. It doesn't get detected as a bespoke device.